Writing Operation - Roland GR-700 Owner's Manual

Parameter
When the Pitch Control Jack O is used, this
sets the maximum range of the Pitch Bend
effect (with the pedal) from 1 to 7 (perefect
5th) in semitone steps. [NOTE 5]
Pitch Control
Display
Parameter
Number
am om,
"mn on,
Data
These parameters cannot be edited with the PG-200.
5. Write Mode
a. Writing Operation
1) Writing the edited tone color into the same patch
program number
. @ Set the Memory Protect Switch ® to the
OFF position.
Window ®.
@ Turn the GR-700 to the Write mode by press-
ing the Memory Write Switch @ or the Write *
Button on the PG-200. (The Memory Write
Switch @ lights up.)
The Display Windows show the Bank and
and starts flashing.
24
@ Press a Number Pedal @ assigning the same
patch number that is shown in the Display
Now, writing is completed and the GR-700 is
automatically turned to the Play mode.