Nenn - Roland GR-700 Owner's Manual

c. Other Functions
1) Hold Pedal &
Press the Hold Pedal @ , and the Display will show
"H", and the sound currently in use will be held at
its sustain level as long as the Pedal is depressed.
The Panel Switches ® to @ are On/Off switches
which can be used to add extra effects to the exist-
ing tone color. These switches work whatever mode
the GR-700 is set to. Simply press the switch, and it
will alternately turn on or off. When the switch is
turned on, the indicator lights up.
Panel Switches
Indicator
avi
` -
ea ÖÖÖÖ OG
* Each effect set with the Panel Switches can be
written into memory by taking writing procedure
explained on page 24.
DYNAMICS
[=] = & =
Chromatic
Switch Switches Switches
(String Selector O Dynamics
@Chorus Switch
2) Chorus Switch @
Press this switch to turn on the Chorus effect. Press-
ing it again will turn off. To benefit the best pos-
sible chorus effect, use two amplifiers, if possible.
3) Chromatic Switch ®
The Guitar Synthesizer is designed to pick up even
the delicate pitch difference, but when this switch is
on, the scale becomes chromatic (= temperament)
like the keyboard's.
* In the Chromatic mode, accurate tuning of each
string is required, because the synthesizer sound
chromatically falls on the note that is nearest to
the string's pitch. Also, pitch bending or glissando
effect changes chromatically.
4) Dynamics Switches ®
By using these switches, each DCO, VCF and VCA
section can take on the Dynamics effect.
* The intensity of the Dynamics is set by each
ENV modulation. (See ''C. Parameter Table" on
page 19, 21 and 22.)
5) String Selector Switches ®
Use these switches to select which of the string(s)
should take on the Voice, Hold, or/and Pitch Bend
function(s) work. 1 to 6 correspond to 1st to 6th
strings.
Depress this switch, then by pressing the
| | corresponding String selector Switch (es),
VOICE
select the string(s) which should take
synthesizer voice.
Depress this switch, then select the
HOLD string(s) on which the Hold function
works.
Depress this switch, then select the
ere | | string(s) on which the Pitch Bend func-
tion works.
Depress this switch to select Up or
Down mode of the Pitch Bend function.
(The indicator lights up when the Up
mode is selected.) If the Pitch Bend
Switch described above has been turned
on, and the Up mode is selected pressing
the Foot Volume will raise the pitch.
And in the Down mode, the other way
round.