Pioneer XR-P270C Operating Instructions Manual page 18

( DISPLAY!
CLOCK ADJ
ee N
DISPLAY/
CLOCK ADJ
la~ DISPLAY/
)) cLock ADJ
POWER
STANDBY/ON
TAPE HIE [ee]
CD-PLAY/PAUSE
Sy TAPE-PLAY/DIA
18
<ARE7108>
En
6
OPEN/CLOSE
SETTING THE CLOCK
e This clock provides a 24 hour display.
The clock cannot be set by the remote control unit.
Example : Setting the clock to 6:40
1. While power is turned off, keep the DISPLAY/CLOCK ADJ
button pressed for more than 3 seconds.
button,
4. Press the DISPLAY/CLOCK ADJ button, when "00" seconds
of that minute are reached for precise adjustment.
TURNING ON THE POWER
remote control unit.
@ Confirm the speakers and antenna connections by reading the
section "CONNECTIONS" again.
Press the POWER switch (or POWER button on the
remote control unit).
To switch the power OFF:
Press the POWER switch again.
[ Direct power on
eWhen set to the OFF (STANDBY) position, the following
operations will turn on the power.
1. Pressing the TUNER/BAND button:
AM or FM radio broadcast will be received.
2. Pressing the CD button:
lf a CD is loaded, playback will begin.
3. Pressing the AUX button:
If the component connected to the AUX jack is operated,
sound will be output.
4. Pressing the TAPE I/II button:
If you press the TAPE button, power switches ON. Playback
starts if there is a tape loaded.
5. Pressing the MEMORY button:
The function selected when power was switched off
automatically operates, and play begins.
6. Pressing the OPEN/CLOSE button:
Press this to eject the disc tray.