Pioneer XR-P270C Operating Instructions Manual page 16

16
<ARE7108>
En
CARE OF DISCS
When holding discs, do not touch their signal surfaces.
STORING DISCS
CLEANING DISCS
eDo not use record cleaning sprays or anti-static agents on
discs. Never clean discs with benzene, thinner, or other volatile
solvents, since damage to the disc surface may result,
CD LENS CLEANER
HOW TO HANDLE CASSETTE
TAPES
Is the tape loose, or is some of the tape sticking out of the
cassette?
TIPS ON USING CASSETTE TAPES
Leader tape (which does not allow sound to be recorded over it)
is provided at the beginning of a cassette tape. Start recording
after allowing the tape to run for approx. 5 seconds so that the
leader tape clears the recording head.
Do not use tapes of more than 90 minutes.
Since tapes of more than 90 minutes are so thin, they easily
jam in the pinch roller and capstan, and they are susceptible
to other trouble such as irregular winding. Try not to use
them with this unit.
How can you prevent accidental erasure?
When the tab on the cassette shell is broken out with the tip of
a screwdriver, it will not be possible to activate the recording
function even by pressing the @ button, so valuable recordings
will not be erased in error.
With TYPE I (Normal) tapes, when you want to record again on
a cassette with broken erasure prevention tabs, cover the hole
with a double layer of adhesive tape.
Use only TYPE 1 (Normal) tapes with this unit; TYPE I (HIGH/
CrO2) and TYPE IV (Metal) tapes cannot be used.