One Touch Operation Set Up(Gu! Operation) - Pioneer VSX-604S Operating Instructions Manual

(Figure 1): Initial settings for LD
y))))))
++ 000000 sO
The transmitted signal is...
iigceiteceds PIONEER
.... POWER ON
Press the LD
button.
To operate other makers' components, first complete
REMOTE SET UP procedures (P.29).
Example: When you want to change LD ONE TOUCH
OPERATION commands.
buttons of each function.
The SET UP MENU is displayed.
d S Intelligent
System Control
(Example: LD)
O-®
-You can select which operation buttons will transmit
operation signals and those which will not.
When the operation button's character is black, a signal
will be transmitted. If it is gray, it will not be transmitted.
The buttons's character color changes each time it is
pressed.
When the TV "FUNC" signal is transmitted, the TV
function may not become the function connected
to the receiver.
For this reason, when ather makers' presets are
called up with REMOTE SET UP, commands are not
automatically transmitted.
®, ©
'TV and LD maker settings are displayed.
¢ When you use the REMOTE SET UP learning function
(P.30), the "PIONEER" indication becomes gray.
Remote control signals set with REMOTE SET UP
are transmitted.
To return to the original Pioneer remote control
commands, press the ON/OFF button (on the left of
"PIONEER') to turn the "PIONEER" indication biack.
(If the original settings are not Pioneer remote control
commands, even Pioneer components may switch
OFF when the POWER command is transmitted, or
there may be some other incorrect operation.)
3. After completing settings, press the EXIT button.
NOTE:
31
<ARB7022>