Table of Contents
Advertisement
Basic operation
Starting up the unit
1
Start the engine to boot up the system.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
2
Select the language.
3
Touch
.
4
Select the location if required.
5
Touch
.
6
Select the speaker mode.
[Standard Mode]
4-speaker system with front and rear speakers, or a 6-speaker system with front and
rear speakers and subwoofers.
[Network Mode]
3-way system with a high range speaker, middle range speaker and subwoofer (low
range speaker) for reproduction of high, middle and low frequencies (bands).
NOTE
Once the speaker mode is set, the setting cannot be changed unless this product is restored to the
default settings (page 56).
WARNING
Do not use the unit in Standard Mode when a speaker system for 3-way Network Mode is
connected to the unit. This may cause damage to the speakers.
7
Touch [OK].
Initial Legal Disclaimer screen appears.
8
Touch [OK].
The message for the Bluetooth connection appears.
9
Turn on the Bluetooth function on your device to connect your device to this
product via Bluetooth.
Follow the on-screen instructions to finish the initial setup.
- 9 -
Advertisement
Table of Contents
