U-Line Echelon CLRCO2075 Features page 2

S U P E R I O R F E A T U R E S O F É C H E L O N ™
1. Self closing door hinges are engaged when
door is open approximately 8-10 inches
BENEFIT: Ensures a positive door seal and
prevents door bounce back.
2. "L" shaped door hinges
BENEFIT: This hinge design provides greater
door support thereby permitting larger and heavier
door panels and full overlay doors to be utilized.
3. A slightly contoured, across the top, integrated
door handle design for black and white models
BENEFIT: The contoured shape maintains the
stylized shape of the Echelon series plus permits full
door field reversibility on black and white units.
4. Easy, self cleaning process for the clear ice
maker
BENEFIT: Eliminates any complicated procedures
or time consuming process in order to clean the ice
maker. Just empty the ice bin, turn the switch to
"Clean," and add the U-Line cleaner fluid after the
water reservoir fills. In approximately 45 minutes,
the ice maker has automatically completed a series
of cleaning and rinsing cycles and is ready to start
producing ice once the switch is turned to the "Ice"
position.
5. Seven (7) inch drain height extending from the
rear of the CLRCO2075
BENEFIT: Allows for more installation flexibility
in the respect that the higher the drain height, the
A D D I T I O N A L F E AT U R E S
1. Automatic Defrost
2. Built-in or freestanding
3. All doors (except stainless steel) accommodate a
1/4 inch thick custom panel. All doors come
standard with a flush black or white factory
installed panel.
4. Interior light in refrigerator section
5. Vinyl clad steel cabinet (black/white)
6. Adjustable leveling legs.
7. Available in black, white, and stainless steel.
further the CLRCO2075 can be located from the
gravity feed drain.
6. Drain pump available when access to a gravity
drain is not an option
BENEFIT: The P60 drain pump is specifically
designed for U-Line clear ice makers. It is a fully
sealed pump that contains "automatic shut-off
logic." Both features reduce the risk of water
overflow in the event of drain back-up or unit
malfunction.
7. Flat, recessed, front grille
BENEFIT: Greater toe kick space. The grille
design shields the interior motor compartment and
all electrical components from view.
8. Stainless steel units have a seamless full wrap
stainless steel cabinet and door with sculpted,
contoured handle
BENEFIT: The seamless full wrap stainless steel
door with sculpted handle distinguish this unit from
heavier, "commercial" looks. All stainless units must
be ordered either right or left hand hinged and are
not field reversible.
9. Field reversible doors (except stainless steel)
BENEFIT: Greater flexibility where the unit can
be installed and allows for side-by-side applications.
B E N E F I T S
Maintenance free defrosting.
Provides custom look. No additional clearance around
sides, top, or rear for ventilation. Do not obstruct
front grille.
Standard feature to achieve a custom, built-in look
matching surrounding cabinets.
Automatically illuminates when door opens.
Textured rich look. More resistant to scratching, peeling,
and flaking.
More precise under the counter fit, durable – factory
installed.
Blends with all cabinet colors
CLRCO2075