Problem
What should I do if, after
the cooking zones have
been switched off, resid-
ual warmth is not indicat-
ed in the indicator?
What does it mean when
the burner does not glow
red?
Transport
If you need to transport the product, use the original product packaging and carry it using its
original case. Follow the transport signs on the packaging. Tape all independent parts to the
product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
26 English
All manuals and user guides at all-guides.com
Possible Cause
•
Check for the
following possibility
•
Check for the
following possibilities
Solution
The cooking zone was only
•
briefly used and therefore did
not become hot enough. If the
cooking zone is hot, please call
the customer service centre.
The selected heat setting of the
•
cooking zone is maintained by
a sensor that cycles the zone on
and off, so the surface cooking
area will not always glow red.
•
If you select a low heat setting,
the heat will cycle on and off
more frequently than at higher
settings. The heat also cycles on
and off at the highest setting.