Rear Wheel Removal
6. Remove
the axle shaft
(3), side collar
1. Place the motorcycle on its center stand.
and rear wheel from the swing arm.
2. Loosen the rear axle nut.
NOTE:
3. Loosen the drive chain adjustng bolts (1).
*« Do not depress the brake pedal while the
4. Remove the rear axle nut.
wheel is off the motorcycle. The caliper
5. Remove
the
drive
chain
(2)
from
the
pistons will be forced out of the cylinders
driven
sprocket
by
pushing
the
rear
with subsequent loss of brake fluid. If this
wheel forward.
occurs, servicing of the brake system will
be necessary. See your authorized Honda
dealer for this service.
(1) Adjusting bolt
(3) Axle shaft
(2) Drive chain
77