Table of Contents
Advertisement
Brake fluid must be added to the reservoir
whenever the fluid level begins to reach the
LOWER
level
mark
(1).
Remove
the
screws (2), reservoir cover (3), diaphragm
plate
(4),
and
diaphragm
(5).
Fill
the
reservoir with DOT 4 BRAKE
FLUID from
a sealed container up to the upper level
mark
(6).
Reinstall
the
diaphragm,
diaphragm
plate,
and
cover. Tighten
the
screws securely.
(FRONT)
(1) LOWER level mark
(4) Diaphragm plate
(2) Screws
(5) Diaphragm
(3) Reservoir cover
(6) UPPER level mark
16
Front Brake Lever:
The distance between the tip of the brake
lever (1) and the grip can be adjusted by
turning the adjuster (2).
CAUTION:
+« Align the arrow (3) on the brake lever
with index mark (4) on the adjuster.
(1) Brake lever
(2) Adjuster
(3) Arrow
(4) Index mark
Advertisement
Table of Contents
