BenQ W1070+ User Manual page 32

Volume
Mute
3D Mode
3D Sync Invert
Settings
• Language
• Projector
Position
• Test Pattern
• Auto Source
• Menu Type
32 Menu Functions
Adjusts the volume level of the projector's internal speaker or the volume being
output from the audio output jack.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
The function is accessible through the remote control.
Selects On to temporarily turn off the projector's internal speaker or the volume
being output from the audio output jack.
To restore the audio, select Off.
The function is accessible through the remote control.
This projector supports playing three-dimensional (3D) content transferred through
your 3D-compatible video devices and contents, such as PlayStation consoles (with
3D game discs), 3D Blu-ray 3D players (with 3D Blu-ray discs), 3D TV (with 3D
channel), and so on. After you have connected the 3D video devices to the projector,
wear the BenQ 3D glasses and make sure the power is on to view 3D contents.
When watching 3D contents,
• the image may seem misplaced, however, this is not a product malfunction.
• take appropriate breaks when watching 3D content.
• stop watching 3D content if you feel fatigue or discomfort.
• keep a distance from the screen of about three times the effective height of
the screen when watching 3D content.
• children and people with a history of oversensitivity to light, heart problems,
or have any other existing medical condition should be refrained from
watching 3D content.
Auto
The default setting is
3D format when detecting 3D contents. If the projector cannot recognize the 3D
format, manually choose a 3D mode according to your preference.
When this function is enabled:
• The brightness level of the projected image decreases.
• The Picture Mode cannot be adjusted.
• The 2D Keystone can only be adjusted within limited degrees.
The function is accessible through the remote control.
When your 3D image is distorted, enable this function to switch between the image
for the left eye and the right eye for the more comfortable 3D viewing experience.
The function is accessible through the remote control
Press OK to enter its submenu. See below for more details.
Sets the language for the On-Screen Display (OSD) menus.
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See Choosing a location
Enables this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
Sets whether the projector searches automatically for input sources. Select On to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to Off, the projector selects the last used input source.
Switches to the Advanced OSD menu.
and the projector automatically chooses an appropriate
for details.
.