Fisher & Paykel DishDrawer DD60 Service Manual page 43

Hardware Output ('HO ')
1The WASH SELECTOR
Output
Element relay
(ensure there is water in the tub before running the element)
Lid down or up
Detergent diverter
Fill valve
Wash motor direction
Drain motor direction
Rinse aid pump
Drying fan
Rinse aid LED
Water softener bypass valve
Water softener brine pump
Water softener brine value
Rinse aid pump
Temperature in tub
2 Use the Tub Select
3 Press START/PAUSE
to "o" when an output is running.
4 If the output does not work, a long descending tone is played.
5 Press POWER to exit HO sub-mode back to 'dP' sub mode, press POWER
completely.
Fast Cycle ('FC ')
1 The test Fast Cycle wash program is NOT the same as a normal fast wash program.
2 Press Tub Select to choose the tub.
3 Press START/PAUSE
4 Press START/PAUSE
5 Press POWER button to exit FC sub-mode to "Power off" mode.
Continuous Cycle ('CC ')
1 This sub mode is only used in the factory and is NOT required for servicing in the field.
2 Use the WASH SELECTOR
High Heat Cycle ('HH ')
1 This sub mode is only used in the factory and is NOT required for servicing in the field.
2 Use the WASH SELECTOR
Show Room Mode ('SH ')
1 In this mode, the user can press all the buttons. However, the user won't be able to start a cycle.
2 This sub mode has a 30 second timeout after which it resets to "Heavy" and goes through displaying
each of the cycles.
3 Show room mode can be exited by turning the power button off on the display , then pressing and
holding the POWER
NOTE: The showroom mode will survive a power off at the wall socket, and needs to be manually
removed to operate correctly.
button scrolls through various outputs.
button to choose what tub to run the output on.
to turn load each on or off. The last character on the display changes from "-"
button again to start the Fast Cycle.
button again to pause the Fast Cycle.
button to go to the next sub-mode.
button to go to the next sub-mode.
and START/PAUSE button for 5 seconds.
6 DIAGNOSTICS
Display Code
Er
Ld
dd
FU
P1
P2
rd
dF
LE
C1
C2
C3
A1
0
C
o
button again to exit
42