Model Number Location & Identification - Fisher & Paykel DishDrawer DD60 Service Manual

3 MODEL NUMBER LOCATION & IDENTIFICATION
3.1 Model Number & Product Code
The model number and product code is shown on the product data plate, which is located on the
front of the chassis trim.
The product code is a specific code relating to that product, which if ordering spare parts, you need
to use the product code to ensure you get the correct parts manual, as some parts for the Phase 9
DD are specific for this model.
The model number shows the product type, as follows:
Market size:
60 = 60cm
24= 24"
DishDrawer
3.2 Serial Number
The serial number consists of three letters and six digits and contains the information shown in the
following example:
R I G 123456
Cumberland code
Letter C U
Year 1 2 3
Fisherpaykul code
Letter F I
Month 1 2
Manufacturing Plant Codes
Code
Refrigeration
Manufacturing
Manufacturing
In the example above, the appliance was manufactured in the sixth month (Feb) of 2016 in the
Thailand factory.
C = Classic model
A = Aspire model
DD24DCHTX9
D = Double drawer model
S = Single drawer model
M B E
4 5 6
S H E
3 4 5
Factory
B
G
P
X = Stainless steel
W = White
B = Black
H = Water softener
T = Tall tub model
Sequential serial number
Manufacturing plant code
FISHERPAYKUL code indicating
month of manufacture
CUMBERLAND code indicating year
of manufacture
R L A
7 8 9
R P A
6 7 8
Country
New Zealand
Thailand
Mexico
Iteration Number
N D
0
Y K U
9 10 11
L
12
24