Dry Cycle Settings - Fisher & Paykel 11 Series User Manual

DRY CYCLE SETTINGS

Adjust the default cycle settings to suit your preferences. Tap the setting to select then
adjust as needed.
OPTIMISE
Optimise the cycle as required to reduce noise, save time or save energy. Some optimise
options are not available on certain cycles to ensure optimal results.
TIME
Set your preferred cycle time. The cycle will end after the set time. If the time is set to
AUTO
the cycle will end automatically when the load reaches the selected dryness level.
DRYNESS
Set the level of dryness required. The dryer will sense the remaining moisture in the load to
end the cycle. Level 1 is the dampest setting, while level 5 is the driest. Try a higher or lower
setting if the load dryness is not as expected.
30