Kenmore AquaLITE HF5010 Use & Care Manual page 19

Always follow all safety precautions when performing maintenance to
the hard floor wet/dry vacuum cleaner.
WARNING
To reduce the risk of an electric
shock, ensure the hard floor
cleaner is turned off before
performing any maintenance.
BRUSH ROLLER SELF-CLEANING
WARNING
• Ensure the storage base is
plugged in.
• Before brush roller self-
cleaning, clean the DWT and
ensure the water level in the
CWT is above 40% full.
1. Place the hard floor cleaner on
the storage base after use. The
hard floor cleaner starts roller
air drying automatically while
being charged. Refer to page
12-14 for more details.
MAINTENANCE AND CARE
WARNING
Do not operate the hard floor
cleaner without filters in place.
2. Press the self-cleaning button
on the top of the handle to
start brush roller self-cleaning.
NOTE:
The brush roller self-
cleaning lasts for 2 minutes every
time. If needed, repeat the self-
cleaning process.
3. While the brush roller is self-
cleaning, the hard floor cleaner
will stop roller air drying. The
air dry light on the storage
base and the roller air drying
indicator on the display will
turn off. The brush roller self-
cleaning indicator on the
display will turn on, and the
suction power indicator will
illuminate intermittently.
- 19 -