Kenmore AquaLITE HF5010 Use & Care Manual page 13

CHARGING AND BRUSH ROLLER AIR DRYING
Charging
Port
2. Place the hard floor cleaner
onto the storage base.
3. Plug the charging adapter into
a wall outlet.
4. The hard floor cleaner begins
to charge. The battery indicator
on the display screen flashes
continuously. The battery
status indicator turns on, while
the cleaner is being charged.
5. The hard floor cleaner starts
roller air drying automatically
while being charged. The
air dry light on the storage
base illuminates steadily. The
roller air drying indicator on
the display screen flashes
continuously.
6. Optional: If you want to stop
roller from air drying, press the
air dry button located on the
storage base as shown. The air
dry light turns off. The roller air
drying indicator on the display
screen turns off.
NOTE:
The charging process
continues.
7. When the hard floor cleaner
has been fully charged (100%)
and the roller air drying has
completed, the display screen
turns off.
NOTE:
Make sure the hard
floor cleaner is fully charged
before using for the first time. It
may take up to 4 hours to charge
completely if fully discharged.
NOTE:
If the cleaner completes
charging, but the air drying
has not completed, the battery
indicator and battery status
indicator will turn off first. The
roller air drying continues. It
takes 4 hours for the brush roller
to air dry completely every time.
- 13 -
Air Dry Light
Air Dry
Button