Kenmore AquaLITE HF5010 Use & Care Manual page 18

EMPTYING THE DIRTY WATER TANK
2. Pull the tank lid up and empty
the dirty water tank. Clean
the dirty water tank with the
cleaning tool.
3. Remove the HEPA filter from
the tank lid. If needed, wash
the HEPA filter with clean
water.
NOTE:
Allow the wet filter to
air dry completely before storing
or reinstalling onto the tank lid.
The HEPA filter does not need to
be washed every time. Wash the
HEPA filter when there is a lack
of suction and or visibly dirty.
4.Wash the tank lid and fill tubes
with clean water and allow to
air dry. Make sure the visible
dirt on the fill tubes is cleaned
up.
Fill Tubes
5. Reinstall the tank lid to the
dirty water tank, and then
place the HEPA filter onto the
tank lid.
6. Place the dirty water tank back
into the hard floor cleaner until
you hear a "click". Ensure the
dirty water tank is secured in
place.
- 18 -
Click!