Advertisement
29. Wrap the Lat Cable (88) around a 3 1/2" Pulley
(78). Attach the Pulley and a Long Cable Trap (102)
to the Top Frame (6) with a 318"x 1 3/4" Bolt(93)
and a 3/8" Nylon Jamnut (113). Make sure the
Cable Trap Is turned to hold the Cable In the
groove of the Pulley.
30. Remove the preattached 3 112" Pulleys (78) from
the Pulley Plates (63).
Wrap the Lat Cable (88) around a 3 1/2" Pulley
(78). Attach the Pulley and a Cable Trap (68) to the
second set of holes from the top of the Pulley
Plates (63) with a 3/8" x 2" Bolt (100) and a 3/8"
Nylon Locknut (87). Make sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
31. Attach the end of the Lat Cable (88) inside of the
ButterflyTop Frame (7) with a 5/16" x 2 1/2" Bolt
(59), two 5/16" Washers (90), and a 5/16" Nylon
Locknut (86).
32. Locate the Butterfly Cable (69), which is the
shortest Cable, Attach the Cable to the Pivot
Bracket (70) on the Left ButterflyArm (25) with a
5/16" x 1" Shoulder Bolt (103) and a 5/16" Nylon
Locknut (86).
33. Wrap the Butterfly Cable (69) over a "V"-pulley(55).
Attach the Pulley and a Long Cable Trap (102) to
the indicated bracket on the Butterfly Upright (3)
with a 3/8" x 2 1/2" Bolt (18) and a 3/8" Nylon
Locknut (87). Make sure that the Long Cable
Trap is turned to hold the Cable In the groove of
the Pulley.
29
102
31
86-.=,_
90
4
I
I
90
86
[
];_'_-_.70
103
_ /'/IIi A\\E -25
102
14
Advertisement
