Roland HP 3700 Owner's Manual page 26

HP-2700/HP-3700
Date : Mar. 5 1990
Roland Digital Piano MIDI Implementation Version : 1.00
BMChanne! voice message OTremoto
@Note Off
Status Second Third
ant kk wi
Onit kk OOH
n= MIDI channel number: OH - FR (@- 15) O= chi 15 = chié
kk = note nusber : OOH - 7FH (0 - 127)
w = velocity : OOH - 7FH (0 - 127)
* Velocity is ignored.
@Note On
Status Second Third
Oni KkA wit
n= MIDI channel number: OW - FH (0-15) O*= cht 15 = chJ6
kk = note number : OOH - TFH (0 - 127)
w = velocity + OH ~ 7FH {1 - 127)
Note numbers outside the range of 15-113 are transposed to the nearest octave
within this range,
Transpose Junction does not affect the recognized note numbers,
@Control Change
© Volume
Status Second Third
Bn ord wi
n= MIDI channet number : OH - FH (0 ~ 15) Q= chil 15 = ch.l6
w = volume : OOH - TFH (@ - 127)
* Recefved volume messages affect received note event levels (Rx ch/Part), and
cannot affect Interna) Keyboard notes.
+ MID) volume control is relative to master voluse slider.
OData Entry
Status Second Third
Bol 06H aal
Boil 26H bbit
n> MIDI channe) number: OH - FR (O- 15) O-=ch1 15 = chJ6
aabb = value defined by RPN parameter.
OHold- 1
Status Second Third
Ball 40H wi
n= MIDI channel number : OH- FR (O- 15) O-=ch1 15 = ch16
w = contro! value : OOH - 7FH (0 - 127)
*hold-1 (dasper) Is not a switch (ON/OFF) but a continuously vartable
controller,
© Sestenuto
Status Second Third
Bot 42k wit
n= MIDI channel number: OH - FH (@- 15) Q-ch1 15 = chl6
w = control value : OOH - 7FH (0 - 127) 0-63 = OFF 64-127 = ON
* sostenuto 1s an ON/OFF switch.
O Set
Status Second Third
Bol 43H Ww
n= MIDI channel number : OH - FH (0 ~ 15) O=chl 15 = chib
w = control value : OOH - 2FH (O - 127)
* Soft Is not a switch (ON/OFF) but a continuously var{able controller.
24
Status Second Third
Bait SCH wi
n= MIDI channel number: OH - FH (0 - 18) 0=chl 15 = ch i6
w = control value : OO - 7FH (0 - 127) 0-63 = OFF 64-127 = ON
* tremolo settings via MIDI are treated as temporary messages. They are not stored
In a patch setting or stored in back-up senory.
* tremolo is ignored when MIDI function 11 Is selected.
OChorus
Status Second Third
Bnif SDH wil
n= MIDI channel number : OH - FR (0 - 15) Q=chl 15 = chl6
w = control value : OOH - 7FH (0 ~ 127) 0-63 = OFF 64-127 = ON
+ chorus settings via MIDI are treated as a temporary messages. They are not stored
in @ patch setting or stored in back-up memory.
¥ chorus {s Ignored when MID! function II Is setected.
ORPN LSB
Status Second Third
Bab 64H 1K
n= MID! channel nuaber > OH- FH (O- 15) OF chd 15 = chié
11 = lower byte of the parameter number controlled with RPN.
* RPN LSB Is recognized when MID} functions set to Rx. RPN = ON.
ORPN MSB
Status Second Third
Boh = GSH
n= MIDI channel number : OH - FH (® ~ 15) O= ch.) 15 = ch 16
am = upper byte of the parameter nuaber contrailed with RPN,
* RPN MSB Is recognized when MIDI functions set to Rx. RPN = ON.
9# RPN (Registered Parameter Number ) #¢
Using MID! RPN, parameter can be changed with Contre! change messages. RPN MSH
and LSB specify the paraseter to be controiled, white Data Entry shows the paraneter
value.
HP-2700 and HP-3700 recognize only Fine Tune (RPN#1).
RPN data entry comments
MSB LSB MSB LSB
OOH O1N aalt bbH fine tune
aabb = -4096 - +4096
(-50 cent - +50 cent)
Received fine tune values which are greater than -50 cents or less than +50 cents
are recognized just as -50 cents or + 50 cents.
@Program change
Status Second
Cal ppl
n= MIDI channel number : OH - FH (0 - 15) O= ch} 15 = ch. ib
Pp = program number ; OOH - 3FH (0 - 55)
Recelved program change messages are assigned as follows.
prograe puaber tone
PIANO 1
PIANO 2
HONKY TONK
HARPS CHORD
HARPSICHORD
VIBRAPHONE
E. PIANO
E. PIANO
Oo me WH me Oo