Roland HP 3700 Owner's Manual page 13

2. Adjusting to Suit Your Preferences
Changing the Weight of Using the Pedals to
the Keyboard's Touch
Change Voices
You can also use the Soft or Sostenuto pedals
to change voices. This is convenient when you
wish to keep both hands on the keys while
changing to a different voice.
This instrument provides you with 3 different
choices for Touch. This setting determines how
the strength the keys are played with, the
volume, and the tone will relate to each other.
The keyboard will have a lighter feel to it, and
fortissimo can be obtained with a touch that is
| weaker than normal. Convenient for those using
lighter fingering than most people, or for young
children.
u An ordinary, natural touch.
At this setting, the keyboard will have a heavier
feel, and quite a bit of force will be needed to
obtain fortissimo. Useful for those who normally
apply more pressure than others, or when wish-
ing to strengthen the fingers.
L.
Strength of Touch [L—
Lai,
4 @ Press the KEY-TRANSPOSE button.
Reverts the unit to the standard mode of
operation. (See page 8.)
Allows changing the voice using the Soft pedal
(left pedal).
Allows changing the voice using the Sostenuto
pedal (right pedal).
@ While holding down the KEY-TRANSPOSE
button, press the TREMOLO (PEDAL) button.
The indicator on the TREMOLO (PEDAL) but-
ton will start blinking. One of the REVERB
(AIH) buttons will also start blinking, indi-
cating the function which is currently in
effect.
SUWINjOA
@ With the KEY-TRANSPOSE button still held
down, make the selection by pressing one of
the REVERB (I/II/IIl) buttons.
TREMOLO
REVERB.
TRANSPOSE
ROOM
= STAGE
HALL
Hold down
@
[Voice Changes Made With a Pedal]
The pedal switches between the currently selected voice
and the previously selected voice.
Hf you have pressed PIANO 1, then have pressed
VIBRAPHONE...
When the pedal is depressed, it will switch between
the PIANO 1 and VIBRAPHONE sounds.
The indicator on the CHORUS (TOUCH) but-
ton will start blinking. One of the REVERB
(IMM) buttons will also start blinking, indi-
cating which Touch setting is currently in
effect.
@ With the KEY-TRANSPOSE button still press-
ed, select the new choice for the Touch by
pressing one of the REVERB (IJ/I/Il) buttons.
If you have pressed PIANO 1, then have simul-
taneously pressed both PIANO 2 and VIBRA-
PHONE...
When the pedal is depressed, it will switch you
between the PIANO 1 sound, and PIANO 2 mixed with
VIBRAPHOEN sound.
KEY CHORUS REVERS.
TRANSPOSE ROOM STAGE HALL
= comm
Hold down
|