Table of Contents
Advertisement
TRIP COMPUTER
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
DISPLAY
2
SERVICE
INTERVALS
Resetting : to reset the distance before service, press and hold button 1 for approximately 10 seconds until the display shows
the service mileage without flashing.
NB : if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the
event of an oil change, both the distance before the next service and the next oil change should be reset.
5 4 - G e t t i n g t o k n o w y o u r v e h i c l e
Interpreting the display selected
Mileage before service
Service
With the ignition switched on, the engine not running and the display set to
1000KM/
"SERVICE INTERVALS", press the button 1 or 2 for approximately 10
12month
seconds to display the mileage before service (distance or time to the next
service). When the distance value approaches its limit, there are several
possible scenarios :
Service
– distance/time remaining is less than 1500 km or one month : the message
100KM/20days
"Service" is displayed accompanied by the nearest term (distance or time) ;
– distance equals 0 km or date of service reached : the message "Service
required" is displayed and depending on the variants accompanied by
Service
warning light
required
The vehicle requires a service as soon as possible.
.
Advertisement
Table of Contents
