Renault TRIBER 2024 User Manual page 114

REAR SEATS -SECOND ROW
To tumble the second row
backrest -left side seat
4
– lower the headrest ;
– turn the knob 3 to fold the seat
backrest ;
– Fold/tumble will be done
simultaneously as shown in illustration
A ;
– Ensure that tumble action is fully
completed by holding the tumbled
seat ;
– repeat the above instructions in
reverse manner to return the backrest
and lock the seat to its original
position.
11 2 - Yo u r c o m f o r t
When returning the
backrest, there is a clicking
sound. It is because of one-
touch mechanism.
It is recommended to
tumble the rear second row
seat, with the headrest in
lowered condition, to avoid
breakage of head rest bezel.
It is not permitted to drive
the car while second row
seat is in tumbled condition
as it leads to damage to the
passenger in the third row.
To remove the third row backrest
– Ensure the seatbelts are properly
stored and lower the headrest fully ;
– Pull knob 1 upwards and rotate the
backrest forward to certain angle as
shown in the illustration A ;
– Lift the seat backrest slowly upwards
in the same orientation to disassemble
the seat backrest ;