Trip Computer; Consumption - Renault TRIBER 2024 User Manual

TRIP COMPUTER

General information
Trip computer A
The display depends on the vehicle
and the country.
Scroll through the following information
by pressing the button 1 .
Trip computer B
The display depends on the vehicle
and the country.
Press the 2 switch to browse between
menus and select functions by
repeatedly pressing the 3 or 4 switch,
then if necessary use the 5 switch to
confirm "OK".
a) Total distance recorder.
b) Trip distance recorder.
c) Fuel used in litre (from last reset).
d) Average fuel consumption (from last
reset).
e) Current fuel consumption.
f) Estimated fuel range (DTE - distance
to empty).
g) Distance travelled from last reset.
h) Average speed from the last Reset.
i) Display settings
j) Service reminder
Resetting the trip mileage
To reset the trip mileage recorder, the
display must show the Trip meter
function.
Press and hold button 1 .
Interpreting some of the values
displayed after resetting
The values showing average fuel
consumption, range and average
speed will become more stable and
reliable the further you travel after
pressing the reset button.
For the first few kilometres after
pressing the reset key you will notice
that the range increase/decrease as
you travel. This range takes into
account the average fuel consumption
since the last time the reset button was
pressed.
Refer to the table on the following
pages showing display examples.
The current fuel consumption may
increase when,
– the vehicle stops accelerating.
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed).
– when driving from an urban area
onto the open road.
G e t t i n g t o k n o w y o u r v e h i c l e - 5 1
2