Preparation (2). Initialization - Sony TRINITRON PVM-14L3 Service Manual

Name Description Inch2o | incht4 |
SREM_CH4 = | Dedicated for serial remote
Last memory
i: Input (NPUT 0=A 1=B
U: UnderScan
(O:NormalScan 1=UnderScen}|
SREM_SINGLE| Serial remote °
Single address
SREM_GROUP} Serial remote oO
Group address
SREM_ Serial remote 0x30 x30.
SETTING Communication coditions
B:BAUD RATE
P: PARITY
S: STOP BITS
PREM_PIN1 | Parallel remote Pin-1
PREM_PIN2 | Parallel remote Pin-2
PREM_PIN3 | Parallel remote Pin-3.
PREM_PIN4 | Parallel remote Pin-4 7
PREM_PING {Parallel remote Pin-6 10
|
PREM_PIN7 | Paraliel remote Pin-7
PREM PIN8 | Parallei remote Pin-8 9
OSD_R_ OSD R LEVEL WHITE 240
1,EVEL_WHITE,
Osi OSD G LEVEL WHITE 240
LEVEL_WHITE
OSD_B_ OSD B LEVEL WHITE 240
LEVEL_WHITE
lOSD_R_ __|OSD RLEVEL BLACK 20
LEVEL_BLAGK
OSD G LEVEL BLACK
}OSD_B_ OSD B LEVEL BLACK {20
LEVEL_BLACK|
BKM150CP__| Setting of BKM-150CP OPT-A
SETTING_1 |M:0=SDTI 1=SDi
Ar AUDIO CHANNEL of SDI
T; TC MODEof SDI
Setting of BKM-150CP OPT-B
M:0=SDTI 1=SD}
A: AUDIO CHANNEL of SDi
T: TC MODEof SDI
_
BKM150CP_ |TC MODEof SDI
SETTING_2 | A: AUDIO CHANNEL of SDT!
T: TC MODEof SDTI
BKM-350CP OPT-B
A; AUDIO CHANNEL of SDTI
T: TC MODEof SDT!
Not used [oss
Not used
ant
Not usec
Not used
Not used
PYM-4La/aLar2oL4
2-3. Preparation (2). Initialization
* Supply composite video or component signals as shown
in Table 2-2,
Detaits of signal
100 % white
75 % white
100 % white
75 % white
Voice/eound
100 % white Y
75 % white ¥
75 %color
B-Y, R-Y
(P-P for
this item only)
100 % white ¥
75 % white Y
75%color
B-Y, R-Y
(P-P for
this item only)
0.436Vims.
* Tn this chapter, C4 indicates the control items in the
service mode.
Example : [60 H-FREQ
* Before turning off the power after adjustment in the
service mode, write the adjustment data. When the
power is tumed off before writing, adjusted data will all
be lost.