Q Block Assy Removal (20 Inch); Removal Of Anode Cap - Sony TRINITRON PVM-14L3 Service Manual

Color video monitor
Hide thumbs Also See for TRINITRON PVM-14L3:
Table of Contents

Advertisement

1-4-9.
Q Block Assy Removal (20 inch)
® Screw (+PSW 4 x 8)
@ Sorew (+PSW 4 x 8) @ Two screw
(+PSW 3 x 12)
© Connector label
1-4-10. Removal of Anode Cap
Short-circuit the anode of the picture tube and the anode cap to the metal chassis, picture tube shield or carbon painted on
the picture tube, after removing the anode.
+ Removal Procedure
"Of
(1) Tum up one side of the rubber
cap inthe
(2) Usinga thumb, pull upthe rubbercap
(3) When one side of the rubber cap is
©
y
Anode button
direction indicated by arrow @).
firmly in the direction indicated by
separated from the anode button, the
arrow ©).
anode-cap can be removed by turning
up the rubber cap and pulling up it in
+ Handling Precautions
the direction of the arrow ©.
(1) Do not scratch the surface of anode cap with a sharp object.
(2) Do not press the mbber so hard that it damages the inside of
anode caps. A shatter-hook terminal is built into the rubber.
(3) Do not turn the foot of the rubber over.
'The shatter-hook terminal will stick out or damage the rubber.
PYN-4La/4L4r20L4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trinitron pvm-14l4Trinitron pvm-20l4

Table of Contents