Sony TRINITRON PVM-14L3 Service Manual page 36

SUBCON..
Description
S:SUBCON RGB
S: SUBCON COMPONENT
$:SUBCON OPTION-A
{Other than 129X)
Description
Last memory, common
I: input (INPUT 0=A 1=B
2=RGB 3=OPT1 4=OPT2)}
D: Format display
(Q=OFF 1-ON 2=AUTO)
M; Supporting MacroVision
(1-Supported 0=Not Supported)
A 1080/48 flag
(1=Supported 0=Not Supported)
B :720/50P flag
(1=Supported O=Not Supported)
Inch14
$:SUBCON OPTION-B 50
(Other than 129X)
S: SUBCON OPTION-RGB(129%)}
8; SUBCON 50
OPTION-COMPONENT(129X)
SUBCON_ |S: SUBCON LINE-A 50
PHASE (COMPOSITE)
S$: SUBCON LINE-A (8) 50
S$: SUBCON LINE-B
(COMPOSITE)
Not used
$: SUBCON RGB
S: SUBCON COMPONENT
S: SUBCON OPTION-A
(Other than 129X)
§$: SUBCON OPTION-B
(Other than 129x)
S:SUBCON OPTION-RGB(129X)
S: SUBCON
OPTION-COMPONENT(129X)
$; SUBCON LINE-A
(COMPOSITE)
S: SUBCON LINE-A (S)
S:SUBCON LINE-B
(COMPOSITE)
Not used
S: SUBCON RGB
Last memory, common
U; UnderScan
(@NormalScan 1=UnderScan)
A: Aspect (0=4:3 1=16;9)
B: Blue Only (0=OFF 1=ON)
M:MONO (0=OFF 1<ON)
H: HV DELAY (0=OFF 1=ON)
K: 48MARKER (0=OFF 1=ON}
'S: VALIDATE-AUTOSETUP-RESULI
(0-OFF. 1-ON)
W: WB AUTO
IATRIX (0=601 1=709)
C: COMPONENT LEVEL
(Q=SMPTE 1=BETAO 2BETA7.5)
N: NTSC SETUP LEVEL
(Q=SETUPO 1=SETUP7.5)
W:WHITE BALANCE MEMORY
(Q=COL1 1=COL2 2=USER)}|
H: HD LINES (0:1080 1:1035)
D BKM-142HD AUTO DETECT
(0: MANUAL 1: AUTO)
DEGAUSS DELAY
0x80. 0x80
$: SUBCON COMPONENT
$:SUBCON OPTION-A
{Other than 129X)
Dedicated for serial remote
Last memory
1: Input
(INPUT 0=A 1=B 2=RGB
3=OPT1 4=OPT2)
A 'Aspect (O=4 : 3, 1=16 : 9)
U: UnderScan
(0:NormalScan 1=UnderScan}|
°
$ :SUBCON OPTION-B
(Other than 129X)
$ :SUBCON OPTION-RGB
(129X)
S :SUBCON
OPTION-COMPONENT (129X),
Dedicated for serial remote
Last memory
I: Input (INPUT 0=A 1=8
2=RGB 3-OPT1 4=OPT2)
A: Aspect (0=4:3 1=16:9)
U: UnderScan
(O:NormalSean 1=UnderScan}
°
LED
LED display status
S$ :On/Ott
B :Bright, C : CAPTION VISION
214
Last memory, common
M:Mode(Mode::mode O-normal)
L sLanguage (LANGUAGE
O=ENGLISH 1=GERMAN
2=FRENCH 3=iTALIAN
4=SPANISH 5=JAPANESE
K :KEY PROTECT
{0=Not Protected 1=Protected)|
Dedicated for serial remote
Last memory
1: input (INPUT 0=A 1=B
2=RGB 3=OPT1 4<OPT2)
A: Aspect (0=4:3 1=16:9)
U: UnderScan
{0:NormalScan 1=UnderScan}
PYM-14L9/14L4/20L4