Table of Contents
Advertisement
Temperature range
Sensor failure monitoring
Cable speci cation max.
Ball pressure test temperature
Pollution degree
Controller type
Software class
Storage temperature
IP class
Protection class
Dimensions
Weight
Electrical safety and Electro-Magnetic Compatibility for
this product is covered by the compliance with the EN/IEC
Standard "Automatic electrical controls for household and
similar use":
• EN/IEC 60730-1 (general)
4
Danfoss ECtemp Next Plus
Room temperature: 5-35°C.
Floor temperature: Max. 35°C
is default.
The thermostat has a built-in
monitoring circuit, which will
switch o the heating if the
sensor is disconnected or short-
circuited
2
1x4 mm
or 2x2,5 mm
75°C
2 (domestic use)
1C
A
-20°C to +65°C
30
Class II -
86 x 86 x 16/40.5 mm
(in-wall depth: 24.5 mm)
103 g
2
Installation Guide
Advertisement
Table of Contents
