Table of Contents
Advertisement
cond Audio Program (SAP)/
Stereo recording and playback
':C'_I_ 'i >_/'
i_
:: _
AUDIO SELECT
1-2
1
Your unit is fitted with a SAP broadcast system which enables
you to switch to a Second Audio Program when viewing a se-
lected channel,
Th}s iunct}en apptbs only when the program is broadcast in
multi-Languages through the SAP broadcast system.
The VHS Hi-Fi audio system permits high fidelity recording of
MTS STEREO TV broadcasts.
1
Press M_=NU. P ress t or !' to select ',-rv SETUP",
When a MTS STEREO broadcast
then press ENTER.
is received,"STEREO" witt appear
MENU
SETUP
Press t or { to select "SAP", Then press
ENTER to select "ON".
Then press MENU repeatedty until
the menu screen is c_eared.
MENU
SETUP
on the screen and the program
can be viewed or recorded in ste-
reo.
The Hi-Fi stereo recording proce-
dure is the same as for normal
recordings,
Note:
When using a CATV system, stereo TV programs may be
transmitted over a mDno cable channel
In this case
"STEREO" will not appear and the sound will be in mend.
• AUDIO
SELECT
Output selection
When viewing an MTS stereo TV program, or playinga
_rerecordedVHS HI-FI stereo videotape, pressAUDIO
SELECT to select how the audio willbe heard throughthe
speakers. Normally set to the Hi-FI stereo position, this
button can be set to the MONO position if the stereo
Listening to SAP
When the unit Js turned on or a channel selection is made,
make certain the letters "SAP" appears on the screen.
This means that the "Second AudioProgram"broadcast-
ing is avaitabte.
OR
Notes:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode,the audio wilt automatisally be monaural
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cord not connected),
the sound will be monaural.
broadcast or videotape audiois of poor quality.The "R"
and "L" positions allow the audio from the Right or Left
Hi-Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape Or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
several seconds. Refer to the chart below.
flOUTPUT
I SOUND HEARD ON BOTH
ELECTION
I SPEAKERS
TEREO
[ STEREO_
ch
LEFT CHANNEL AUDIO
R ch
I RIGHT CHANNELAUDIO
MONO
_MONO
46
Advertisement
Table of Contents
