Table of Contents
Advertisement
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen displays the word "MUTE" in the lower/right
corner. To
restore the sound, press MUTE or VOLUME Av.
When you press MUTE, the Closed Caption feature is automatically
activated. To deactivate captions and restore normal sound, press
MUTE again. This feature works only when the Closed Caption mode
is set to OFF. See "Using the closed captioned feature" on page 40 for
more information about closed caption settings.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
Note: The MTS feature is not available in VIDEO mode.
In general, you can leave your TV in stereo mode because the TV
automatically outputs either stereo or monaural ("mono") sound,
depending on the broadcast type.
When the TV receives a stereo or SAP broadcast, the word "STEREO"
or "SAP" displays on the screen every time you turn the TV on,
change the channel, or press
RECALL.
To listen
1. Press
2. Press
3. Press
to stereo sound:
MENU.
< or 1_to highlight tile AUDIO menu.
• or • to highlight MTS.
4. Press • or _ to highlight STR (stereo).
Note: If the stereo sound is noisy, select MONO
to reduce the
noise.
AUDIO
_4(:_ _ ¸
MOVE[_&]
SELECT
[4
_]
--
CABLE
MUTE
TVNIDEO
TIMER
VCR
(_
®®®
G®®
ADV/
FAV._
_
_
FAV.
PIP
CH
RECALL
MUTE
•VOL AV
- MENU
- AT<
•
ii i i ..
To listen to a second audio program
(SAP):
1. Press MENU.
2. Press • or 1_to highlight the AUDIO menu.
3. Press • or • to highlight MTS.
4. Press • or 1_to highlight SAP. The TV speakers will output only
the second audio program.
33
Advertisement
Table of Contents
