Table of Contents
Advertisement
illustration
of MW20FNI/FL
OPEN/CLOSE
--7
3,6
6,7
5
4
Press OPEN/CLOSE on the unit.
The disc tray will open.
OPEN/CLOSE
Place a disc onto the tray.
Position it with the printed label side up, align it
with the guides, and place it in its proper position.
3
OPEN/CLOSE
Press OPEN/CLOSE
on the unit or PLAY on
the unit or the remote
control,
• The disc tray closes automatically.
On the TV screen, ,,A,, changes
to
"_j_"
and then playback
commences,
4
• A menu scceen will appear on the
TV screen,
if the disc has a menu
feature.
Press t/_. or <-/-_
to make a selection.
Press STOP to end playback.
The unit memorizes the stopped point,
depending on the disc. "_" appears on
the screen. Press PLAY to resume
playback (from the scene point).
Ifyou press STOP again or unload the
_
disc("m"eppearsonthescreen.),the
unit will clear the stopped point.
7
To stop the playback, press STOP.
Then press OPEN/CLOSE on the unit.
The disc tray opens.
Remove the disc then press POWER,
The disc tray closes automatically and
unit turns off.
OPEN/CLOSE
Notes:
• If a non-compatible disc is loaded, "Incorrect Disc", "Region
Code Error" or "Parental Error" will appear on the TV screen
according to the type ot loaded disc. tt these appear_ check
your disc again (see pages 8 and 59).
• Some discs may take a minute or so to start playback.
• When you set a single-faced
disc label downwards
(ie. the
wrong way up) and press PLAY or OPEN/CLOSE
on the unit,
@"
will appear on the diap)ay for about 5 seconds and then
"No Disc" or "incorrect
Disc" will be displayed.
• Some playback operations of DVDs may be intentionally fixed
by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed,
some
playback features may not be available. Atso refer to the in-
structions supplied with the DVDs.
50
........
J
Advertisement
Table of Contents
