Toshiba MW20FN1/R Owner's Manual page 5

IMPORTANT SAFEGUARDS /
Power Source
i
27. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call theCATV system instaUer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNiT
(NEC SECTION 810o20)
NEC-NATIONAL ELECTRICAL CODE
$2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
IMPORTANT RECYCLING INFORMATION
This product uses both Cathode Ray Tube (CRT) and other components that contain
lead. In your community there might be regulations that require you to dispose
these materials properly under environmental considerations. Please contact your
local authorities, or the Electronic industries Alliance (http://www.eiae.org) for
disposal or recycling information.
AC Outlet
Wider Hole _
and Blade
i-
Polarized AC Cord Plug
tOne blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord previded for operation on AC. Insert
the AC cord plug into a standard t2OV 60Hz polarized AC outlet
Notes:
• Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or out the blade. It is the user's
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. Tile unit should return to nOrmal operation.
• If the AC cord plug is plugged in for the first time, wait for about 5
seconds before pressing the power button on the front panel.
51