Advertisement
UNPACKING YOUR MITER SAW
[_
WARNING
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. This cord must remain
unplugged whenever you are
working on the saw.
1.
Remove the miter saw from the
carton. IMPORTANT: Do not lift
miter saw by the trigger switch
handle. It may cause misalignment.
2.
Place the saw on a secure
stationary work surface.
3.
Separate all parts from the packing
material. Check each one with
the illustration to make certain all
items are accounted for, before
discarding any packing material.
WARNING I
= If any part is missing or damaged,
do not attempt to assemble the
miter saw, or plug in the power
cord until the missing or damaged
part is correctly replaced. To
avoid electric shock, use only
identical replacement parts when
servicing
double insulated tools.
Call 1-800-4-MY-HOME ®for
replacement parts.
Miter Saw
Angle Finder
Angle Finder Storage Clip
Clamp
Dust Bag
S
Blade Wrench
13
Advertisement
