Adding Fuel To The Machine; Checking The Tire Pressure; Checking The Engine Oil Level - Toro Z Master 7500-D Series Setup Instructions

1

Adding Fuel to the Machine

No Parts Required
Procedure
Add fuel to the machine before starting it; refer to your
Operator's Manual for the correct fuel and procedure.
2
Checking the Engine-Oil
Level
No Parts Required
Procedure
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
the Operator's Manual.
3

Checking the Tire Pressure

No Parts Required
Procedure
Rear tires air pressure specification: 152 kPa (22
psi).
Note:
Check the tire pressure before starting the
machine. Refer to your Operator's Manual for the
correct tire type, correct air pressure needed, and
procedure.
4
Checking the Wheel Lug
Nut Torque
No Parts Required
Procedure
Before you start the engine and use the machine,
check the wheel lug nut torque; refer to Checking the
Wheel Lug Nuts in the Operator's Manual.
2