Adding a thermostat to the BACnet network
The following procedure explains adding the TC300 thermostat to a Bacnet net-
work using the Niagara 4 workbench.
1. In the Niagara 4 workbench, create a new Station.
2. To configure the BACnet device, click Station > Config > Drivers >
3. On the property sheet, change the Object Id to any other number instead of -1
4. In the Nav view seen on the left, click BACnet Comm > Network > MstpPort >
Adding a thermostat to the BACnet network
BacnetNetwork > Local Device in the Nav view.
The property sheet of the local BACnet device appears in the right view.
and click Save.
Link.
The property sheet of the MSTP port page appears.
Fig 6. Local Device Property Sheet
17