Table of Contents
Advertisement
Product identification:
The following essential health and safety requirements of Directive 2006/42/EG, Annex I are
relevant for the identified uncompleted machinery. According to the remarks in column 3 they
have been solved respectively bear residual hazards which have to be covered by the
manufacturer of the final machinery. Risks, not being relevant for the uncompleted machinery are
not listed.
2006/42/EC
Denotation
Annex I
1
Essential health and safety requirements
1.1.2
Principles of safety integration
1.1.3
Materials and products
1.1.5
Design of machinery to facilitate its handling
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
1.3.2
Risk of break-up during operation
1.3.3
Risks due to falling or ejected objects
1.3.4
Risks due to surfaces, edges or angles
1.3.8.1
Moving transmission parts
1.4
Required characteristics of guards and
protective devices
1.4.1
General requirements
1.4.2
Special requirements for guards
1.4.2.1
Fixed guards
1.5
Risks due to other hazards
1.5.1
Electricity supply
1.5.2
Static electricity
1.5.4
Errors of fitting
1.5.5
Extreme temperatures
1.5.6
Fire
1.5.8
Noise
1.5.9
Vibrations
1.5.13
Emissions of hazardous materials and
substances
Diese Erklärung bescheinigt die Übereinstimmung mit den
genannten Richtlinien, ist jedoch keine Beschaffenheits- oder
Haltbarkeitsgarantie.
Die Sicherheitshinweise der mitgelieferten Produktdokumentation
sind zu beachten.
Copyright (©) Innomotics GmbH; 2023; All rights reserved
Annex MR2
to the declaration of incorporation
No. A5E36964102AM
Geared motor 2KJ3...
7 / 8
Requirement fulfilled
y/n
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
y
This declaration is an attestation of conformity with the indicated
Directive(s) but does not imply any guarantee of quality or
durability.
The safety instructions of the accompanying product
documentation shall be observed.
Additional remark
Fulfillment of safety
objectives of Directive
2014/35/EC
Advertisement
Table of Contents
