Table of Contents
Advertisement
Technical data
12.5 Mounting positions and oil quantities
12.3
Weight
The weight of the entire geared motor is given in the shipping papers.
The weight is stated on the rating plate of the motor, gearbox or geared motor.
The weight specification refers only to the product in the delivery state.
12.4
Sound energy level
SIMOGEAR geared motors have noise levels below the permissible noise levels defined for
gearboxes in VDI guideline 2159 and for motors in IEC 60034-9. Interaction with gearboxes
causes the motor noise values L
The circumferential velocity of the motor pinion has a significant influence on the additional
gearbox noise level. As a consequence, higher speeds or lower ratios result in higher noise.
SIMOGEAR geared motors provide a decisive advantage here, since the motor plug-on pinion
allows transmission ratios of up to 12 in the input stage.
Code
L
pfA
L
WA
External noise
Noise not generated by the gearbox but emitted from it are not taken into consideration.
Noise emitted by the drive and driven machines or the base are also not taken into
consideration. Even when the noise from the gearbox have been transferred there.
12.5
Mounting positions and oil quantities
Only operate the gearbox in the mounting position specified on the rating plate. This ensures
that it will be provided with the correct quantity of lubricant.
Note
Sizes 29 and 39
Gearbox sizes 29 and 39 are lubricated for life. An oil change is not required.
For mounting positions M2 and M4, the gearboxes have a breather valve. There is no opening
to check the oil level.
Description of the symbols:
Venting
76
or L
to increase on average by 3 to 5 dB (A).
pfA
WA
Description
A-weighted enveloping surface sound pressure level
Sound power level
Oil level
Oil drain
SIMOGEAR electric monorail gearbox
Operating Instructions, 01/2024, A5E53220855A/RS-AA
Unit
dB (A)
dB (A)
Advertisement
Table of Contents
