Sw Itching Clock Display; Adjusting Clock; Theft Deterrent Faceplate - Kenwood KRC-235 Instruction Manual

Adjustment Item Display
Bass level "BAS"
Treble level "TRE"
Balance "BL"
Fader "FD"
5
Exit Audio Control mode
Press the [A.ADJ] button.
Sw it ching Clock D isplay
Sw itching the displayed inform ation.
Press the [CLK] button.
Each time the button is pressed it sw itches betw een clock
display and current source.
During clock display the clock indicator is ON.
A djust ing Clock
1
Select the clock display
Press the [CLK] button.
2
Enter clock adjustment mode
Press the [CLK] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM ] or [AM ] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit clock adjustment mode
Press the [CLK] button.
Range
–4 — 4
–4 — 4
L15 — R15
R15 — F15
— 7 —
Thef t D et errent Faceplat e
The faceplate of the unit can be detached and taken w ith you,
helping to deter theft.
Rem oving t he Faceplat e
Press the Release button.
The faceplate is unlocked, allow ing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case w hile detached.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places w ith too much
dust or the possibility of w ater splashing.
Reat t aching t he Faceplat e
1
Align the projections on the unit w ith the grooves on the
faceplate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allow ing you to use the unit.