Table of Contents
Advertisement
Other features
(See page 7)
A udio Cont rol Set t ing
Adjust various parameters of sound quality.
1
Press the AUD button to enter the control mode.
Each time the AUD button is pressed, the adjustment mode
display changes as follow s:
7 Bass 7 Treble 7 Balance 7 Fader 7 Volume
If you do not move to step 2 in 5 seconds, the unit w ill sw itch
back to the volume adjustment mode (i.e., the normal mode).
N OTE
Source tone memory
Each source (tape, FM , AM , and disc changer) has its ow n mem -
ory in w hich to store the bass and treble tone settings.
The settings made for a particular source are then recalled auto-
matically w henever you use that source (e.g., FM mode uses the
tone settings made for FM , AM for AM , etc.).
2
Press the d / u buttons to adjust the mode show n in the dis-
play.
Use the follow ing table as a guide for adjusting the settings in
each mode.
Adjustment
Operation of Audio control button
mode
d button
(Display)
Bass
Bass decreased.
(" BAS" )
Treble
Treble decreased.
(" TRE" )
Balance
Left channel empha-
(" BAL" )
sized.
Fader
Rear channel
(" FAD" )
increased.
Clock D isplay
Display the time.
Sw itching to Time Display:
Press the CLK button repeatedly until the clock is displayed.
When the RDS station tuned into is transmitting a time signal,
have the unit's built-in time adjust automatically to the cor-
rect local time.
Adjusting the Time:
Shut dow n the audio system temporarily w henever an incom-
ing call is received.
u button
Bass increased.
When the telephone rings:
Treble increased.
Restoring Original Unit Source During Phone Call:
Right channel empha-
sized.
Front channel
Turning TEL M ute Function Off After Phone Call:
increased.
— 21 —
A djust ing Tim e
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
N OTE
• The displayed time cannot be set manually, but only through
RDS station time signals.
• The time is not adjusted w hen the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
Function of the KRC-259R,159RA/RG,21R
TEL M ut e Funct ion
N OTE
The function w ill not w ork if a cable is not connected to the car
phone.
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Press the SRC button.
"CALL" disappears from the display, and the volume of the orig-
inal source is restored gradually.
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
1
Advertisement
Table of Contents
