Table of Contents
Advertisement
(4)
External view
vy
KDC-S3007 only
ACAUTION
Do not use any accessories other than those provided with your
unit. If you use other accessories, you may damage the unit.
Number of items
nstaitlation
Procedure
},
m
&
CI
HH
Connect the wiring harness wires in the following order: ground,
battery, ignition.
Connect the wiring harness connector to the unit.
Install the unit in your car.
Reconnect the © battery.
Press the reset button.
ysiyb
ACAUTION
*
If your car's ignition does not have an ACC position, connect
the ignition wires to a power source that can be turned on and
off with the ignition key. If you connect the ignition wire to a
power source with a constant voltage supply, as with battery
wires, the battery may die.
If the fuse blows, first make sure the wires aren't touching to
cause a short circuit, then replace the old fuse with one with
the same rating.
Do not let unconnected wires or terminals touch metal on the
car or anything else conducting electricity. To prevent a short
circuit, do not remove the caps on the ends of the unconnected
wires or the terminals.
Connect the speaker wires correctly to the terminals to which
they correspond. The unit may be damaged or fail to work if you
share the © wires or ground them to any metal part in the car.
After the unit is installed, check whether the brake lamps,
blinkers, wipers, etc. on the car are working properly.
material.
15
Advertisement
Table of Contents
