Lexmark XC8160dte User Manual page 137

Troubleshooting
Action
Step 6
Check if the web proxy servers are disabled.
Are the web proxy servers disabled?
Step 7
Access the Embedded Web Server.
Did the Embedded Web Server open?
Unable to read flash drive
Action
Step 1
Check if the flash drive is inserted into the front USB port.
Note: The flash drive does not work when it is inserted into the
rear USB port.
Is the flash drive inserted into the front USB port?
Step 2
Check if the flash drive is supported. For more information, see
"Supported flash drives and file types" on page 35
Does the error message still appear?
Step 3
Check if the front USB port is disabled. For more information, see
"Enabling the USB port" on page
Does the error message still appear?
Enabling the USB port
From the home screen, touch Settings > Network/Ports > USB > Enable USB Port.
Checking the printer connectivity
1
From the home screen, touch Settings > Reports > Network > Network Setup Page.
2
Check the first section of the network setup page, and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.
137.
Yes No
Go to step 7. Contact your
administrator.
The problem is Contact
solved. support.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. The problem is
solved.
Contact customer The problem is
support. solved.
137
customer