Engine characteristic – setting the auxiliary spring
17.11
Warning
Danger of burns Some vehicle components become very hot when the vehicle is operated.
–
Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system
before the vehicle parts have cooled down.
–
Let the vehicle parts cool down before you perform any work on the vehicle.
Preparatory work
–
Tilt the motorcycle to the left and secure against falling in this
position.
Guideline
Angle of title approx.
Main work
–
Remove screws
E00372-10
–
Remove cap
and spring insert
–
Pull both springs off of the spring insert.
B00056-11
–
Mount the required auxiliary spring (
adjusting spring
cover.
(125 XC‑W EU)
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with blue color coding (54637072500)
(150 XC‑W US)
E00373-10
Auxiliary spring without color coding (50437069050)
Auxiliary spring with yellow marking (54637072300)
The recess in spring insert
Info
Screw
engine characteristic.
–
Check the O-ring in the cap.
–
Position the cap.
17 TUNING THE ENGINE
45°
1
.
2
3
, adjusting spring
, auxiliary spring
5
from the clutch cover.
p. 124)
3
and position them together in the clutch
5
engages in the angle lever.
6
must not be turned as this would worsen the
4
,
4
and
125