H Save & Exit - Fetco CBS-1261 User Manual

H Save & Exit
The brewer will save changes only from the "H" menu. DO NOT reboot brewer or toggle ON/OFF-exit as below.
TO EXIT PROGRAMMING & HOW TO SAVE CONTROL SETTING CHANGES
HOW TO SAVE CHANGES AND EXIT-The brewer is in PROGRAMMING mode
Programming A-H
A-H+
STOP STOP
1
2
3
From any screen-
Press STOP button
until the EXIT ("H")
screen appears
User Settings will be erased and overwritten to factory default settings by the following five programming changes
NOTE:
1) When setting or changing units of display for the tank temperature (F Fahrenheit or C Celsius). (SETTING B4)
2) When setting or changing units of display for the volume (L liters, G gallons).
3) When setting brewer model The software sets equipment to brewer defaults
4) When loading from USB (Reprograms settings)
5) When restoring defaults (Reloads to defaults )
Go to fetco.com for the latest versions of all information
Saving changes and exiting PROGRAMMING
EXIT EXIT
H NO + H
STOP STOP
1
2
3
From the "H" screen From EXIT screen
Press button 2 to Press button 1 to
toggle to the EXIT- toggle to the SAVE
YES screen
SAVE
YES - H1
STOP STOP STOP
1
1
2
2
3
3
From SAVE screen
Press button 2, to
toggle to the SAVE-
YES screen
screen
User Guide & Operator instructions
Page 15
.
EXIT
NO + H YES -
STOP STOP STOP
1
2
3
To SAVE and EXIT
Press button 1 to
SAVE your changes
and EXIT
(SETTING B5)
(SETTING F3)
(SETTING F9)
(SETTING E10)
P214 September 2023