Programs, Projects And Firmware; Program Checks - Crestron TPS-GA-TPI Operation Manual

Crestron TPS-GA-TPI
TCP/IP Communication
SIMPL Windows
VisionTools Pro-e
Firmware
Cresnet Connections
Operations Guide – DOC. 6609A
NOTE: Required for operation with a Crestron control system.
Ethernet Communication
PC RUNNING
CRESTRON TOOLBOX
•
Establish serial communication between TPS-GA-TPI and PC.
•
Enter the IP address, IP mask and default router of the TPS-GA-TPI via the
Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable
DHCP.
•
Confirm Ethernet connections between TPS-GA-TPI and PC. If connecting
through a hub or router, use CAT5 straight through cables with 8-pin RJ-45
connectors. Alternatively, use a CAT5 crossover cable to connect the two
LAN ports directly without using a hub or router.
•
Use the Address Book in the Crestron Toolbox to create an entry for the
TPS-GA-TPI with the TPS-GA-TPI's TCP/IP communication parameters.
•
Display the "System Info" window (click the
TPS-GA-TPI entry.

Programs, Projects and Firmware

Program, project or firmware files may be distributed from programmers to installers
or from Crestron to dealers. Firmware upgrades are available from the Crestron
website as new features are developed after product releases. One has the option to
upload programs and projects via the programming software or to upload and
upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to
the SIMPL Windows help file, VisionTools Pro-e help file, or the Crestron Toolbox
help file.
If a SIMPL Windows program is provided, it can be uploaded to the control system
using SIMPL Windows or Crestron Toolbox.
Upload the VisionTools Pro-e file to the touchpanel interface using VisionTools
Pro-e or Crestron Toolbox. If loading a project to a touchpanel interface that has an
external compact flash slot, please use Crestron Toolbox.
Check the Crestron website to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
Upgrade TPS-GA-TPI firmware via Crestron Toolbox.
•
Establish communication with the TPS-GA-TPI and display the "System
Info" window.
•
Select Functions | Firmware... to upgrade the TPS-GA-TPI firmware.

Program Checks

Actions that can be performed on the TPS-GA-TPI vary depending on whether it is
connected via Cresnet or Ethernet.
For Cresnet connections, using Crestron Toolbox, display the network device tree
®
Isys G-Series Touchpanel Interface
ETHERNET
®
G-Series Touchpanel Interface: TPS-GA-TPI • 43
Isys
TPS-GA-TPI
icon) and select the