Glossary And Terminology - Mitsubishi Electric MEGR Manual

3 GLOSSARY AND TERMINOLOGY

There are some recurring terms in the manual which are described below in more detail.
Manufacturer: this is the company that has designed and built the machine in line with current laws, implementing all the good
construction rules, and paying attention to the health and safety of people interacting with the machine.
Buyer: the person responsible for making the purchase who must supervise the organisation and assignment of duties to ensure that
everything is done in compliance with the applicable laws.
Owner: Legal representative of the company, a body, or a natural person who owns the plant where the machine is installed and is
responsible for checking compliance with all the safety rules in this manual and the national regulations in force.
Designer: a competent specialist person duly appointed and authorised to draw up a project that takes into account all the legislative
and regulatory aspects and code of good practice that apply to the system as a whole. In any case, as well as comply with the
instructions provided by the machine Manufacturer, the designer must consider all the safety aspects for all those persons who will
have to interact with the system during its expected life span.
Installer: specialist competent person duly appointed and authorised to set up the machine or system according to the project
specifications and the recommendations of the machine Manufacturer and in compliance with the laws on safety at work.
User: person authorised to manage use of the machine in compliance with the "instructions for use" and the laws in force concerning
safety at work.
Carriers: the persons who take the machine to the destination in a suitable means of transport. They must stow and position the
machine in a suitable way to ensure that it cannot move suddenly during transfer. When using devices for loading and unloading,
they must observe the instructions that can be found on the machine to ensure their own safety and that of those people with whom
they interact in the process.
Handling operators: those who duly set up the machine and implement all the applicable measures so that it can be handled in a
safe and correct manner. They are also those persons who, upon receipt of the machine, move it to the place of installation according
to the instructions which can be found on the machine. All the above employees must have adequate skills and observe the
instructions to ensure their own safety and that of those people with whom they interact in the process.
Maintenance person: the person authorised by the owner to carry out on the machine all the adjustment and check activities
expressly indicated in this manual, and which must be strictly followed. His/her work will only be limited to what is clearly allowed.
Expert operator: person appointed and authorised by the User or the Buyer to use the machine and carry out the routine maintenance
according to the instructions provided by the Manufacturer. In the event of failures not considered in this manual, the expert operator
must request the assistance of a specialist technician.
Specialist technician: the person authorised directly by MEHITS to carry out all operations of ordinary and extraordinary
maintenance. He/she will also carry out all regulations, checks, repairs and replacement of parts that should become necessary
during the life of the unit itself. Outside Italy and those countries where the Manufacturer is not directly present, the Agent is personally
responsible for acquiring a suitable number of Technicians, proportional to the area and the business.
Routine maintenance: all the operations that help to ensure the good performance and efficiency of the machine. These operations
are planned by the Manufacturer who defines the skills required and the procedures to be implemented.
Extraordinary maintenance: all the operations that help to ensure the good performance and efficiency of the machine. These
operations, which are not foreseeable, are not planned by the Manufacturer and must only be carried out by the specialist technician.
Installation, use and maintenance manual
7