Machine Positioning - Mitsubishi Electric MEGR Manual

OBLIGATION:
The machine must be placed in an area only accessible by OPERATORS, MAINTENANCE PEOPLE
and TECHNICIANS; if this is not possible, it must be surrounded by a fence that is at least two metres
from the external surface of the machine (if possible).
The staff of the INSTALLER or any other visitors must always be accompanied by an OPERATOR.
Under no circumstances, must unauthorised personnel be left alone in contact with the machine.
The MAINTENANCE MAN must limit him/herself to the controls of the machine only; the only panel
that can be opened by him/her is the one that accesses the control module - no other must be touched.
The INSTALLER must limit him/herself to connecting the plant to the unit
Access the machine using the relative personal protective equipment and only after having read and
understood the documents and instructions, which must always be kept close at hand.
4.3.2

Machine positioning

The machine is placed directly on the ground. Once the machine has been positioned, it must be checked that it is level in the four
positions indicated in the figure.
Spirit level
Installation, use and maintenance manual
20