Table of Contents
Advertisement
DPE-2600
Battery Removal
To remove battery, depress
battery latch release (C)
slide battery out of power
head.
OPERATION
Starting Unit
The attachment will operate when the battery is installed, the
power indicator LED is lit, and the operator presence switch,
lock off lever switch (if applicable), and power switch are
engaged. Make sure the product is properly positioned to
prevent loss of control and possible serious injury.
Note: This model has three operating modes: low, medium, high.
Use + (E) and - (F) buttons to switch between modes. Power
indicator LED flashes twice when highest or lowest setting is
achieved by pushing + (E) and - (F) buttons. Use power
switch to increase RPM speed within each mode.
1.
Keep movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause loss of
control.
X7508310600
© 03/23 ECHO Incorporated
OPERATION
C
23
Advertisement
Table of Contents
