Mig - Wire And Gas Selection Table - Miller Auto-Line XMT 350 MPa Owner's Manual

8-3. MIG — Wire And Gas Selection Table
WIRE TYPES**
Steel
Flux Core
Metal Core
Stainless Steel
Aluminum
*For self-shielded FCAW wires use the ARGN CO2 gas selection and set inductance to less than 10.
**Wire diameter in inches (mm). Refer to Section 6-4 to change displayed units.
OM-231242 Page 34
�
Complete Parts List is available at www.MillerWelds.com
.035 (0.9) STL
.045 (1.2) STL
.052 (1.4) STL
.035 (0.9) STL
.045 (1.2) STL
.035 (0.9) FCAW
.045 (1.2) FCAW
.052 (1.4) FCAW
1/16 (1.6) FCAW
.045 (1.2) MCOR
.052 (1.4) MCOR
1/16 (1.6) MCOR
.035 (0.9) SSTL
.045 (1.2) SSTL
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
GAS TYPES
ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN OXY (ARGON / OXYGEN)
CO2 (CARBON DIOXIDE)
ARGN CO2 (ARGON / CARBON DIOXIDE) *
CO2 (CARBON DIOXIDE)
ARGN CO2 (ARGON / CARBON DIOXIDE)
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN (ARGON)
DEFAULT INDUCTANCE
30
10
30 *
30
70
10