Mig - Wire And Gas Selection Table - Miller 907431002 Owner's Manual

7-3. MIG - Wire and Gas Selection Table

WIRE TYPES**
Steel
Flux Core
Metal Core
Stainless Steel
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
Aluminum
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
*For self-shielded FCAW wires use the ARGN CO2 gas selection and set inductance to less than 10.
**Wire diameter in inches (mm). Refer to section 6-2 to change displayed units.
Notes
.
A complete Parts List is available at www.MillerWelds.com
.035 (0.9) STL
ARGN CO2 (ARGON / CARBON DIOXIDE)
.045 (1.2) STL
.052 (1.4) STL
.035 (0.9) STL
.045 (1.2) STL
.035 (0.9) FCAW
.045 (1.2) FCAW ARGN CO2 (ARGON / CARBON DIOXIDE) *
.052 (1.4) FCAW
1/16 (1.6) FCAW
.045 (1.2) MCOR
.052 (1.4) MCOR ARGN CO2 (ARGON / CARBON DIOXIDE)
1/16 (1.6) MCOR
.035 (0.9) SSTL
.045 (1.2) SSTL
GAS TYPES
ARGN OXY (ARGON / OXYGEN)
CO2 (CARBON DIOXIDE)
CO2 (CARBON DIOXIDE)
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN (ARGON)
DEFAULT INDUCTANCE
30
10
30 *
30
70
10
OM-245171 Page 27