Mig - Wire And Gas Selection Table - Miller XMT 450 MPa Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com

8-3. MIG - Wire and Gas Selection Table

WIRE TYPES**
Steel
.035 (0.9) FCAW
.045 (1.2) FCAW
Flux Core
.052 (1.4) FCAW
1/16 (1.6) FCAW
.045 (1.2) MCOR
Metal Core .052 (1.4) MCOR
1/16 (1.6) MCOR
Stainless Steel
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
Aluminum
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
*For self-shielded FCAW wires use the ARGN CO2 gas selection and set inductance to less than 10.
**Wire diameter in inches (mm). Refer to section 6-3 to change displayed units.
Notes
.035 (0.9) STL
ARGN CO2 (ARGON / CARBON DIOXIDE)
.045 (1.2) STL
.052 (1.4) STL
1/16 (1.6) STL ARGN CO2 (ARGON / CARBON DIOXIDE)
.035 (0.9) STL
.045 (1.2) STL
ARGN CO2 (ARGON / CARBON DIOXIDE) *
ARGN CO2 (ARGON / CARBON DIOXIDE)
.035 (0.9) SSTL
.045 (1.2) SSTL
GAS TYPES
ARGN OXY (ARGON / OXYGEN)
CO2 (CARBON DIOXIDE)
CO2 (CARBON DIOXIDE)
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN (ARGON)
DEFAULT INDUCTANCE
25
25
10
10 *
25
75
25
OM-255083 Page 37