5-9. Welding Wire Diameter Selection For Synergic MIG (DX Models Only)
1
2
5-10. Welding Wire Type Selection For Synergic MIG (DX Models Only)
1
2
5-11. Gas Selection For Synergic MIG (DX Models Only)
1
2
1
Welding Wire Diameters
2
Welding Wire Diameter
Button
Press button to select desired wire
diameter: 0.6 mm, 0.8 mm, 1.0 mm,
or 1.2 mm, and lite corresponding
LED.
1
Welding Wire Types
2
Welding Wire Type Button
Press button to select desired wire
type: Fe (ferris), CrNi (stainless
steel), Al (aluminum), or CuSi (Cop-
per Silicon), and lite corresponding
LED.
1
Shielding Gas Types
2
Gas Selection Button
Press button to select desired
shielding gas type: CO
(Carbon
2
Dioxide), Mix (ArCO
), Arg (Argon),
2
and lite corresponding LED.
OM-246 691 Page 27